PPEI 2010-2018 Dodge Cummins EZ Lynk Custom Tuning Support Pack Emission On – PPEI-EZ-USP-6.7D
When you order this Unlimited Support Pack you will receive access to all the following tunes. Please note some of them may require a switch to be installed, or Additional Transmission Tuning to be purchased.
Emissions Present DST
This tune will program your factory/emissions compliant Cummins with Driver Selectable Tuning power levels consisting of +15HP, +30HP, +60HP, +100HP, +150HP. The “DST Switch” must be installed in order for this tune to operate properly. All power levels are intended and designed for use with your factory engine components.This tune may NOT be used with Aftermarket exhaust installed.
Emissions Present Single Tune
This tune will program your factory/emissions compliant Cummins with the indicated horsepower listed in the tune name. This tune is to be used on a “stock” vehicle with emissions present.This tune may NOT be used with Aftermarket exhaust installed. If you have an DST switch installed, it will not function with this tune installed.
Emissions Present Single Tune w/TCM
This tune will program your emissions present Cummins with the indicated horsepower in the tune name and will also incorporate TCM tuning. The TCM portion of this tune will program the transmission with improved shift points, added line pressure, and torque converter lockup. this will ensure power is put to the ground more efficiently and will also allow the transmission to better support the power increase. Transmission line pressure in this tune is set at 225PSI. The trans will operate at 160-175 until the valve body is upgraded/trans is built. Line pressure, along with other parameters, can be adjusted per your trans builders request.This tune is intended and designed for use with your factory engine components .and is emissions compliant.