PPEI 2011-2016 Duramax LML EZ Lynk Custom Tuning Support Pack Emission On- PPEI-EZ-USP-LML

$559.06

Product Highlights:

When you order this Unlimited Support Pack you will receive access to all the following tunes. Please note some of them may require a switch to be installed, or Additional Transmission Tuning to be purchased.

 

Emissions Present DST

This tune will program your factory/emissions compliant LML with Driver Selectable Tuning power levels consisting of +15HP, +30HP, +60HP, +100HP, and +150HP. The “DST Switch” must be installed in order for this tune to operate properly. All power levels are intended and designed for use with your factory engine components.This tune may NOT be used with aftermarket exhaust installed.

Emissions Present Single Tune

This tune will program your factory/emissions compliant LML with the horsepower level listed in the tune name. This tune is to be used on a “stock” vehicle with emissions present.

CP3 Conv. DST

This tune will program your truck with the proper calibration for your CP3 injection pump conversion. This tune is intended and designed for use with standard CP3 injection pumps/sportsman pumps/CP3 pumps. This tune is intended for use with the stock turbo and stock injectors. DST Power levels consist of +30HP, +60HP, +100HP, +150HP, +200HP. With this setup you will be capable of attaining slightly more power than with your factory CP4 injection pump, but will still be limited by the stock turbo below 550RWP.

CP3 Conv. 10mm DST

This tune will program your truck with the proper calibration for your CP3 injection pump conversion. This tune is intended and designed for use with a 10mm CP3 Stroker Pump/Powerflo 750 This tune is intended for use with the stock turbo and stock injectors. DST Power levels consist of +30HP, +60HP, +100HP, +150HP, +200HP. With this setup you will be capable of attaining slightly more power than with your factory CP4 injection pump, but will still be limited by the stock turbo and stock injectors and will typically remain below 550RWP until further modification.

CP3 Conv. 10mm A Turbo DST

This tune is intended and designed for use with a 10mm CP3 Stroker Pump/Powerflo 750 and an aftermarket turbo charger, and stock injectors.DST Power levels will be determined by the components limitations.

CP3 Conv. 10mm CTurbo DST

This tune is intended and designed for use with a 10mm CP3 Stroker Pump/Powerflo 750 and a compound turbo setup, and stock injectors.DST Power levels will be determined by the components limitations. This tune may need adjustments depending upon modifications.

CP3 Conv. CTurbo DST

This tune will program your truck with the proper calibration for your CP3 injection pump conversion and compound turbo setup. This tune is intended and designed for use with standard CP3 injection pumps/sportsman pumps/CP3 pumps and an atmospheric turbo over the stock or larger VVT/VGT in the valley.

Quantity:

WHAT OTHERS HAVE PURCHASED WITH THIS PRODUCT