2010-2012 Ram 2500/3500 Cummins 6.7L Boost Tube Upgrade Kit Red Powdercoat Banks Power – Banks 25997
Are you running the new bad-ass Banks Monster-Ram for the 6.7L Cummins? Banks boost tubes are larger than the factory pipe and designed to work with the stock elbow or new Banks Monster-Ram (3.5″ or 4″) which will improve airflow, and allow the turbocharger to spool up faster.
Banks cold side tubes have 37% greater flow area than stock tubes. Produced from high-quality aluminized steel, the tubes are mandrel bent and constant diameter. This allows for quicker turbo spool. Better flowing intercooler tubes improve retention of boost pressure (increases density) between turbo, intercooler, and intake resulting in maximum horsepower. Our red powder-coat finish stops before the end of the tubes for better grip ensuring our 4- and 5-ply heavy-duty high-temperature silicone couplers hold tight under high-boost conditions. Spring-loaded constant tension clamps maintain a stronger grip to prevent leaks or blown boots.
This kit is designed to work with the stock elbow or new Banks Monster-Ram (3.5″ or 4″) and the stock intercooler (or aftermarket intercooler with stock inlet and outlet size and location).
- Increase flow area up to 37% over the stock boost tubes with Banks’ huge 3-1/2″ boost tubes.
- Stock Ram tubes are plastic.
- Banks boost tubes are 3-1/2″ constant diameter mandrel bent Aluminized Steel with larger radius bends.
- More air allows for more fuel which means more horsepower.
- Huge increase in size and flow over stock (3.5″ vs 3.0″)
- Greater cooling capacity
- Lower EGTs
- Mandrel-bent aluminized steel construction
- Constant diameter tubing for the best flow
- Perfect fit and finish
- 4- and 5-ply heavy-duty silicone couplers
- Spring-loaded constant tension clamps
- Combine with Banks 3.5″ or 4″ Monster Ram for maximum power
- Works with stock intercooler or aftermarket intercooler with stock inlet and outlet size and location
Emissions Compliant: D-161-122
- Diameter: 3.5″
- Material: Aluminized Steel
- Finish: Red powder-coated
- Banks: 3.5″
- Stock: 3.0″
Banks cold side has 37% greater flow area than OEM cold side.
Better flowing intercooler tubes results in less boost pressure loss allowing for more air and fuel to be delivered to your engine resulting in maximum horsepower.
– Stock intercooler
– Stock intake elbow
– Banks Monster-Ram intake elbow (3.5″ or 4″)
– Aftermarket intercooler with stock inlet/outlet size and location
- 2010-2012 Ram 2500|3500 Truck w/ Cummins 6.7L Engine