BD Diesel 2013-2019 Dodge Cummins 6.7L Cool Down Timer Kit V2.0 – 1081160-D3
Turbochargers operate at high temperatures. The Cool Down Timer is designed to keep the engine running when the ignition is turned off to prevent turbocharger bearing failure that could occur when the engine is shut down, stopping the cool lubricating oil flowing to the turbocharger while it is still hot. If the oil flow is shut off too early, the remaining oil in the bearing housing will overheat causing coking of the bearings which causes both premature bearing wear and reduced oiling of the bearings. Allowing the engine to idle to a minimum operating speed gives the turbocharger time to cool down. The CDT is adjustable for up to 5 minutes of idle time, or optionally works with any K-Type EGT probe for temperature-based shutdown.
- Dodge 2006-2018 kits come with factory plug-ins for easy installation
- Prevent turbo damage during hot engine shutdown
- Recommended for aftermarket turbos without water-cooling
- 2 Hours 30 Minutes
- 24,000 Miles